Issue with no rotation in training

Installation and usage on Windows / Installation unter Windows
Post Reply
Sid Dennis
Posts: 9
Joined: 25 Jun 2018 13:25

Issue with no rotation in training

Post by Sid Dennis »

I am using full version.
i looked for advice on learning with a sim.
read its good to learn to hover with a slow piro, 1 rotation per minute.
if i use the rudder trim in config the heli starts tail in,turns to side on then stops.
i found in the training section a option on rotation,chose i per minute but again it stops side on.
i chose heli-x the control rudder and it also stops side on.
i have looked to see if there is a camera view or angle that might need changing but can not see one thats relevent.
any ideas?
azaz44
Posts: 32
Joined: 08 Jun 2022 06:56

Re: Issue with no rotation in training

Post by azaz44 »

Why don't you just trim in your radio?
User avatar
Michael
Posts: 1844
Joined: 25 May 2008 16:11
Location: Germany
Contact:

Re: Issue with no rotation in training

Post by Michael »

Hi

I just tried this setting with the Specter V2 and it rotates very slowly, as expected. I stopped after 360 degrees
trim.jpg
trim.jpg (38.71 KiB) Viewed 21952 times
It might be, that by your input on aileron and elevator, you influence the rotations ...
AxelM
Posts: 2
Joined: 09 Jun 2025 12:26

Re: Issue with no rotation in training

Post by AxelM »

I have the same problem, if you activate rudder in manual mode, it doesn't manage to make the complete turn in 1min.
Attachments
1000001171.jpg
1000001171.jpg (123.05 KiB) Viewed 1003 times
admin
Administrator
Posts: 22
Joined: 07 Apr 2008 10:35

Re: Issue with no rotation in training

Post by admin »

Are you using V11? Please also try the other speeds.
Post Reply