How to use multi-Position switches on the transmitter
Posted: 19 Aug 2015 19:00
Hi,
i'm using a Futaba T8FG transmitter and for my physical heli I use a three position switch to change flight modes:
Lower = motor off
Middle = medium head speed
Upper = higher head speed
I have not found any way to make Heli-X differentiate between middle and upper switch position, but the transmitter sends different signal levels for each position (-100 / 0 / +100) on the channel assigned to this switch.
In the button assignment window, the switch is shown as button 1 and is OFF (black) in lower position and ON (red) in middle and upper position.
I now assigned the second head speed to a different switch but would like to have the same setting as in the real world.
regards
Thomas
i'm using a Futaba T8FG transmitter and for my physical heli I use a three position switch to change flight modes:
Lower = motor off
Middle = medium head speed
Upper = higher head speed
I have not found any way to make Heli-X differentiate between middle and upper switch position, but the transmitter sends different signal levels for each position (-100 / 0 / +100) on the channel assigned to this switch.
In the button assignment window, the switch is shown as button 1 and is OFF (black) in lower position and ON (red) in middle and upper position.
I now assigned the second head speed to a different switch but would like to have the same setting as in the real world.
regards
Thomas